YUSHI UM-1 Series Ultrasonic Thickness Gauge

Add time：2025-02-08 17:21

um-1 series Ultrasonic Thickness Gauge

File size: 382.5KB

Select all

UM-1 Series Technical Parameters

Display Screen	128×64 Dot Matrix LCD Display (EL Backlight)
Working Principle	Using dual crystal probe pulse-echo method, echo-echo method (UM-1D)
Standard Mode Measurement Range	0.8mm~300mm (depending on the probe used and the material being measured)
Coating Mode Measurement Range	3mm~20mm (using standard probe, UM-1D)
Measurement Lower Limit for Pipe Material (Steel)	Middle 20mm×3.0mm (standard probe), Middle 15mm×2.0mm (small diameter pipe probe), measurement error ≤±0.1mm.
Measurement Error	±0.1mm H<10mm:±(1%H+0.1)mm H≥10mm Note: H is the actual thickness of the measured object
Repeatability	0.1mm
Measurement Resolution	0.1mm or 0.001in
Unit	Millimeters or Inches
Calibration Mode	Quick Calibration, Two-Point Calibration
V Path Correction	Automatic V sound path correction, compensating for the non-linearity of the dual crystal probe
Measurement Update Rate	4Hz
Material Sound Speed Range	1000~9999 m/s or 0.0394~0.3937 in/us
Storage Function	Divided into 5 arrays, can store 500 thickness values
Minimum Value Capture	Refers to capturing the minimum value in the measurement process
Alarm Function	Can set thickness limits, with alarm sound prompts for measurements outside the limits
Sound Speed Storage	Can store sound speeds of 5 different materials
Working Language	Can choose Chinese, English
Communication Interface	USB interface or RS232 serial port (optional)
Application Software	UMView software for data transmission, storage, analysis, and document editing (optional)
Power Supply	Two 1.5V AA batteries, with low voltage prompt when power is insufficient
Operating Time	Alkaline batteries can be used for 200 hours (without backlight)
Automatic Shutdown	Automatically shuts down after 5 minutes of inactivity
Working Temperature	-10℃~+50℃
Size	149mm×73mm×32mm (H×W×D)
Weight	210g (including battery)